UNITED STATES SECURITIES AND EXCHANGE COMMISSION
Washington, DC 20549
 
FORM 10-Q
 
x QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d)
OF THE SECURITIES EXCHANGE ACT OF 1934
For the quarterly period ended September 29, 2007
 
OR
 
OF THE SECURITIES EXCHANGE ACT OF 1934
For the transition period from __________ to __________.
 
Commission File Number: 333-124824
 
RBC Bearings Incorporated
(Exact name of registrant as specified in its charter)
 
Delaware
 (State or other jurisdiction of incorporation or organization)
95-4372080
(I.R.S. Employer Identification No.)
   
One Tribology Center
Oxford, CT 06478
(Address of principal executive offices)
 
06478
(Zip Code)
 
(203) 267-7001
(Registrant’s telephone number, including area code)
 
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes x   No o
 
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, or a non-accelerated filer. See definition of “accelerated filer and large accelerated filer” in Rule 12b-2 of the Exchange Act. (Check One):
 
Large Accelerated filer o  Accelerated filer Non-accelerated filer o

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes o   No x
 
As of October 31, 2007, RBC Bearings Incorporated had 21,571,686 shares of Common Stock outstanding.
 


 


TABLE OF CONTENTS

Part I - FINANCIAL INFORMATION
3
     
ITEM 1.
Unaudited Consolidated Financial Statements
3
ITEM 2.
Management’s Discussion and Analysis of Financial Condition and Results of Operations
13
ITEM 3.
Quantitative and Qualitative Disclosures About Market Risk
19
ITEM 4.
Controls and Procedures
20
 
Changes in Internal Control over Financial Reporting
20
 
Limitation of Effectiveness of Controls
21
     
Part II - OTHER INFORMATION
21
     
ITEM 1.
Legal Proceedings
21
ITEM 1A.
Risk Factors
21
ITEM 2.
Unregistered Sales of Equity Securities and Use of Proceeds
21
ITEM 3.
Defaults Upon Senior Securities
22
ITEM 4.
Submission of Matters to a Vote of Security Holders
22
ITEM 5.
Other Information
22
ITEM 6.
Exhibits
22
 
2


Part I. FINANCIAL INFORMATION

ITEM 1.  Financial Statements
 
RBC Bearings Incorporated
Consolidated Balance Sheets
(dollars in thousands, except share and per share data)
 
   
September 29,
2007
 
March 31,
2007
 
 
(Unaudited)
     
ASSETS
         
Current assets:
         
Cash
 
$
5,772
 
$
5,184
 
Accounts receivable, net of allowance for doubtful accounts of $882 at September 29, 2007 and $867 at March 31, 2007
   
56,051
   
54,636
 
Inventory
   
113,877
   
103,022
 
Deferred income taxes
   
6,645
   
7,115
 
Prepaid expenses and other current assets
   
4,210
   
2,914
 
Total current assets
   
186,555
   
172,871
 
Property, plant and equipment, net
   
69,296
   
61,209
 
Goodwill
   
30,725
   
29,631
 
Intangible assets, net of accumulated amortization of $2,864 at September 29, 2007 and $2,329 at March 31, 2007
   
9,014
   
5,793
 
Deferred financing costs, net of accumulated amortization of $501 at September 29, 2007 and $409 at March 31, 2007
   
1,051
   
1,207
 
Other assets
   
3,050
   
3,002
 
Total assets
 
$
299,691
 
$
273,713
 
           
LIABILITIES AND STOCKHOLDERS' EQUITY
         
Current liabilities:
         
Accounts payable
 
$
24,253
 
$ 21,299
Accrued expenses and other current liabilities
   
9,618
 
11,683
Current portion of long-term debt
   
750
 
750
Capital lease obligations
   
164
 
169
Total current liabilities
   
34,785
 
33,901
Long-term debt, less current portion
   
53,500
 
58,655
Capital lease obligations, less current portion
   
463
 
456
Deferred income taxes
   
7,843
 
6,479
Other non-current liabilities
   
7,898
 
6,051
Total liabilities
   
104,489
 
105,542
           
Stockholders' equity:
         
Preferred stock, $.01 par value; authorized shares: 10,000,000 at September 29, 2007 and March 31, 2007; none issued and outstanding
   
 
Common stock, $.01 par value; authorized shares: 60,000,000 at September 29, 2007 and March 31, 2007; issued and outstanding shares: 21,541,386 at September 29, 2007 and 21,408,994 at March 31, 2007
   
215
 
214
Additional paid-in capital
   
177,479
 
169,489
Accumulated other comprehensive loss
   
(1,275
)
(2,206)
Retained earnings
   
20,068
 
1,724
Treasury stock, at cost, 42,955 shares at September 29, 2007 and 37,356 shares at March 31, 2007
   
(1,285
)
(1,050)
Total stockholders' equity
   
195,202
 
168,171
Total liabilities and stockholders' equity
 
$
299,691
 
$273,713
 
See accompanying notes.
 
3


RBC Bearings Incorporated
Consolidated Statements of Operations
(dollars in thousands, except share and per share data)
(Unaudited)

   
Three Months Ended
 
Six Months Ended
 
   
September 29,
2007
 
September 30,
2006
 
September 29,
2007
 
September 30,
2006
 
Net sales
 
$
78,232
 
$
73,248
 
$
158,055
 
$
148,479
 
Cost of sales
   
51,995
   
49,745
   
104,373
   
101,467
 
Gross margin
   
26,237
   
23,503
   
53,682
   
47,012
 
Operating expenses:
                         
Selling, general and administrative 
   
11,888
   
10,610
   
23,190
   
20,237
 
Other, net
   
354
   
283
   
716
   
667
 
Total operating expenses
   
12,242
   
10,893
   
23,906
   
20,904
 
Operating income
   
13,995
   
12,610
   
29,776
   
26,108
 
Interest expense, net
   
681
   
1,203
   
1,547
   
3,365
 
Loss on early extinguishment of debt
   
27
   
   
27
   
3,576
 
Income before income taxes
   
13,287
   
11,407
   
28,202
   
19,167
 
Provision for income taxes
   
4,538
   
4,029
   
9,628
   
6,765
 
Net income
 
$
8,749
 
$
7,378
 
$
18,574
 
$
12,402
 
Net income per common share:
                         
Basic
 
$
0.41
 
$
0.36
 
$
0.87
 
$
0.61
 
Diluted
 
$
0.40
 
$
0.35
 
$
0.85
 
$
0.59
 
Weighted average common shares:
                         
Basic
   
21,431,498
   
20,502,251
   
21,404,490
   
20,295,367
 
Diluted
   
21,813,063
   
21,280,571
   
21,800,754
   
21,096,895
 

See accompanying notes.
 
4

 
RBC Bearings Incorporated
Consolidated Statements of Cash Flows
(dollars in thousands)
(Unaudited)
 
   
Six Months Ended
 
   
September 29,
 2007
 
September 30,
2006
 
Cash flows from operating activities: 
         
Net income
 
$
18,574
 
$
12,402
 
Adjustments to reconcile net income to net cash provided by operating activities:
             
Depreciation
   
4,411
   
4,602
 
Deferred income taxes
   
1,803
   
8,035
 
Amortization of intangible assets
   
535
   
346
 
Amortization of deferred financing costs and debt discount
   
109
   
233
 
Stock-based compensation
   
514
   
252
 
Loss on disposition of assets
   
23
   
116
 
Loss on early extinguishment of debt (non-cash portion)
   
27
   
3,576
 
Other
   
   
12
 
Changes in operating assets and liabilities, net of acquisitions:
             
Accounts receivable
   
1,086
   
875
 
Inventory
   
(7,686
)
 
1,602
 
Prepaid expenses and other current assets
   
(1,311
)
 
(158
)
Other non-current assets
   
(346
)
 
(1,794
)
Accounts payable
   
1,774
   
(1,814
)
Accrued expenses and other current liabilities
   
2,463
   
(342
)
Other non-current liabilities
   
1,614
   
(532
)
Net cash provided by operating activities
   
23,590
   
27,411
 
               
Cash flows from investing activities: 
             
Purchase of property, plant and equipment
   
(11,129
)
 
(4,583
)
Acquisition of businesses, net of cash acquired
   
(7,947
)
 
(8,753
)
Proceeds from sale of assets
   
14
   
9
 
Net cash used in investing activities
   
(19,062
)
 
(13,327
)
               
Cash flows from financing activities: 
             
Net increase (decrease) in revolving credit facility
   
(4,000
)
 
66,000
 
Net proceeds from issuance of common stock
   
   
57,824
 
Repurchase of common stock
   
(235
)
 
 
Exercise of stock options and warrants
   
1,384
   
986
 
Payments on term loans
   
   
(1,421
)
Retirement of debt
   
(1,155
)
 
(144,875
)
Principal payments on capital lease obligations
   
(95
)
 
(153
)
Financing fees paid in connection with senior credit facility
   
(20
)
 
(873
)
Net cash used in financing activities
   
(4,121
)
 
(22,512
)
               
Effect of exchange rate changes on cash
   
181
   
232
 
               
Cash and cash equivalents: 
             
Increase (decrease) during the period
   
588
   
(8,196
)
Cash, at beginning of period
   
5,184
   
16,126
 
Cash, at end of period
 
$
5,772
 
$
7,930
 
               
Supplemental disclosures of cash flow information: 
             
Cash paid during the period for:
             
Interest
 
$
1,548
 
$
4,063
 
Income taxes
   
1,891
   
(636
)
 
See accompanying notes.
 
5


RBC Bearings Incorporated
Notes to Unaudited Interim Consolidated Financial Statements
(dollars in thousands, except share and per share data)

The consolidated financial statements included herein have been prepared by RBC Bearings Incorporated, a Delaware corporation (collectively with its subsidiaries, the “Company”), without audit, pursuant to the rules and regulations of the Securities and Exchange Commission. The March 31, 2007 fiscal year end balance sheet data have been derived from the Company’s audited financial statements, but do not include all disclosures required by generally accepted accounting principles in the United States. The interim financial statements included with this report have been prepared on a consistent basis with the Company’s audited financial statements and notes thereto included in the Company’s Annual Report on Form 10-K for the fiscal year ended March 31, 2007.

The consolidated financial statements include the accounts of RBC Bearings Incorporated, Roller Bearing Company of America, Inc. (“RBCA”) and its wholly-owned subsidiaries, Industrial Tectonics Bearings Corporation (“ITB”), RBC Linear Precision Products, Inc. (“LPP”), RBC Nice Bearings, Inc. (“Nice”), RBC Precision Products - Bremen, Inc. (“Bremen (MBC)”), RBC Precision Products - Plymouth, Inc. (“Plymouth”), Tyson Bearings, Inc. (“Tyson”), Schaublin Holdings S.A. and its wholly-owned subsidiaries (“Schaublin”), RBC de Mexico S DE RL DE CV (“Mexico”), RBC Oklahoma, Inc. (“RBC Oklahoma”), RBC Aircraft Products, Inc. (“API”), Shanghai Representative office of Roller Bearing Company of America, Inc. (“RBC Shanghai”), RBC Southwest Products, Inc. (“SWP”), All Power Manufacturing Co. (“All Power”), RBC Bearings U.K. Limited and its wholly-owned subsidiary Phoenix Bearings Limited (“Phoenix”) and RBC CBS Coastal Bearing Services LLC (“CBS”), as well as its Transport Dynamics (“TDC”), Heim (“Heim”) and Engineered Components (“ECD”) divisions. U.S. Bearings (“USB”) is a division of SWP and Schaublin USA is a division of Nice. All material intercompany balances and transactions have been eliminated in consolidation.

These statements reflect all adjustments, accruals and estimates consisting only of items of a normal recurring nature, which are, in the opinion of management, necessary for the fair presentation of the consolidated financial condition and consolidated results of operations for the interim periods presented. These financial statements should be read in conjunction with the Company’s audited financial statements and notes thereto included in the Annual Report on Form 10-K.

The Company operates in four reportable business segments—roller bearings, plain bearings, ball bearings, other and corporate—in which it manufactures roller bearing components and assembled parts and designs and manufactures high-precision roller and ball bearings. The Company sells to a wide variety of original equipment manufacturers (“OEMs”) and distributors who are widely dispersed geographically.

The results of operations for the three month and six month periods ended September 29, 2007 are not necessarily indicative of the operating results for the full year. The six month periods ended September 29, 2007 and September 30, 2006 each include 26 weeks. The amounts shown are in thousands, unless otherwise indicated.

Recent Accounting Pronouncements

The Company adopted Financial Accounting Standards Board (FASB”) Interpretation No. 48, “Accounting for Uncertainty in Income Taxes - an Interpretation of SFAS No. 109,” (FIN 48”), as of the beginning of its 2008 fiscal year. This Interpretation clarifies the accounting for uncertainty in income taxes. FIN 48 prescribes a recognition threshold and measurement attribute for the financial statement recognition and measurement of a tax position taken or expected to be taken on a tax return. Under FIN 48, the Company first assesses whether it is more likely than not that an individual tax position will be sustained upon examination based on its technical merits. If the tax position is more likely than not to be sustained, under the presumption the taxing authority has all relevant information, it is recognized. The recognized tax position is measured as the largest benefit that is greater than 50% likely of being realized upon ultimate settlement. Previously recognized tax positions that no longer meet the more likely than not recognition threshold are derecognized in the period in which that threshold is no longer met. Accordingly, the unit of account under this interpretation is the individual tax position and not a higher level such as the aggregate of the various positions that are encompassed by the total tax return filing. As a result of the implementation of FIN 48, the Company recognized a $230 increase in its income tax liabilities and a reduction to the April 1, 2007 beginning balance of retained earnings of $230 (see Note 7).
 
6


In February 2007, the FASB issued Statement of Financial Accounting Standard (“SFAS”) No. 159, “The Fair Value Option for Financial Assets and Liabilities, Including an amendment of FASB Statement No. 115,” (“SFAS 159”). This Statement permits entities to choose to measure many financial instruments and certain other items at fair value that are not currently required to be measured at fair value. SFAS 159 is effective as of the beginning of fiscal 2008. The Company has not yet assessed the effect, if any, that adoption of SFAS 159 will have on its results of operations and financial position.

In September 2006, the FASB issued SFAS No. 157, “Fair Value Measurements,” (“SFAS 157”). This Statement is effective for financial statements issued for fiscal years beginning after November 15, 2007. SFAS 157 provides a common fair value hierarchy for companies to follow in determining fair value measurements in the preparation of financial statements and expands disclosure requirements relating to how fair value measurements were developed. SFAS 157 clarifies the principal that fair value should be based on the assumptions that the marketplace would use when pricing an asset or liability, rather than company specific data. The Company is currently assessing the impact that SFAS 157 will have on its results of operations and financial position.

1. Acquisition

On May 22, 2007, the Company acquired the capital stock of Phoenix for $4,360 in cash. As a result of the acquisition, the Company recorded amortizable intangible assets of $2,379, fixed assets of $852, other long-term liabilities of $82, and $1,211 of working capital. No goodwill resulted. Phoenix, located in Gloucestershire, England, manufactures bearings for the steel and mining industries as well as other general industrial applications with bore sizes ranging from 100 millimeters to one meter. Phoenix is included in the Roller Bearings segment.

On July 25, 2007, the Company acquired the assets of CBS for $3,587 in cash. As a result of the acquisition, the Company recorded amortizable intangible assets of $1,036, goodwill of $1,095, fixed assets of $545, and $911 of working capital. CBS, located in Houston, Texas, manufactures, inspects and refurbishes large bearings for the oil and mining industries, as well as other general industrial applications with sizes ranging up to 124 inches in diameter. CBS is included in the Ball Bearings segment.

Proforma net sales and net income inclusive of Phoenix and CBS are not materially different from those reported. 

2. Secondary Offering

On April 18, 2006, pursuant to a purchase agreement with Merrill Lynch & Co., Merrill Lynch, Pierce, Fenner & Smith Incorporated, KeyBanc Capital Markets and Robert W. Baird & Co., the Company, along with certain of its stockholders, sold 8,989,550 shares of its common stock (5,995,529 sold by certain of the Company’s stockholders). The offering yielded the Company aggregate net proceeds of $57,824 after payment of the underwriting discount, commissions and offering expenses. The full amount of the net proceeds was used to prepay outstanding balances under the previous credit agreement.

3. Net Income Per Common Share

Basic net income per common share is computed by dividing net income available to common stockholders by the weighted-average number of common shares outstanding.

Diluted net income per common share is computed by dividing net income by the sum of the weighted-average number of common shares, dilutive common share equivalents then outstanding using the treasury stock method. Common share equivalents consist of the incremental common shares issuable upon the exercise of stock options and warrants.
 
7


The table below reflects the calculation of weighted-average shares outstanding for each period presented as well as the computation of basic and diluted net income per common share:
 
 
 
Three Months Ended
 
Six Months Ended
 
   
September 29,
2007
 
September 30,
2006
 
September 29,
2007
 
September 30,
2006
 
                   
Net income  
 
$
8,749
 
$
7,378
 
$
18,574
 
$
12,402
 
                           
Denominator for basic net income per common share—weighted-average shares 
   
21,431,498
   
20,502,251
   
21,404,490
   
20,295,367
 
Effect of dilution due to employee stock options and warrants 
   
381,565
   
778,320
   
396,264
   
801,528
 
Denominator for diluted net income per common share — weighted-average shares 
   
21,813,063
   
21,280,571
   
21,800,754
   
21,096,895
 
                           
Basic net income per common share 
 
$
0.41
 
$
0.36
 
$
0.87
 
$
0.61
 
                           
Diluted net income per common share 
 
$
0.40
 
$
0.35
 
$
0.85
 
$
0.59
 

4. Inventory

Inventories are stated at the lower of cost or market, using the first-in, first-out method, and are summarized below:

   
September 29, 2007
 
March 31, 2007
 
Raw materials
 
$
9,150
 
$
8,133
 
Work in process
   
35,514
   
32,457
 
Finished goods
   
69,213
   
62,432
 
   
$
113,877
 
$
103,022
 

5. Comprehensive Income

Total comprehensive income is as follows:

   
Three Months Ended
 
Six Months Ended
 
   
September 29,
2007
 
September 30,
2006
 
September 29,
2007
 
September 30,
2006
 
Net income
 
$
8,749
 
$
7,378
 
$
18,574
 
$
12,402
 
Amortization of prior service cost and actuarial losses, net of taxes of $18
   
28
   
   
28
   
 
Foreign currency translation adjustments
   
980
   
(190
)
 
903
   
402
 
Total comprehensive income
 
$
9,757
 
$
7,188
 
$
19,505
 
$
12,804
 

6. Debt

On June 26, 2006, the Company and RBCA terminated the previous credit agreement and the related credit, security and ancillary agreements, and entered into a credit agreement (the “KeyBank Credit Agreement”) and related security and guaranty agreements with certain banks, KeyBank National Association, as Administrative Agent, and J.P. Morgan Chase Bank, N.A. as Co-Lead Arrangers and Joint Lead Book Runners. The KeyBank Credit Agreement provides RBCA, as borrower, with a $150,000 five-year senior secured revolving credit facility which can be increased by up to $75,000, in increments of $25,000, under certain circumstances and subject to certain conditions (including the receipt from one or more lenders of the additional commitment).
 
8


On June 26, 2006, the Company borrowed approximately $79,000 under the KeyBank Credit Agreement and used such funds to (i) pay fees and expenses associated with the KeyBank Credit Agreement and (ii) repay the approximately $78,000 balance outstanding under the Amended Credit Agreement. As of September 29, 2007, $38,000 was outstanding under the KeyBank Credit Agreement. The Company recorded a non-cash pre-tax charge of approximately $3,576 in fiscal 2007 to write off deferred debt issuance costs associated with the early termination of the previous credit agreement. As of September 29, 2007, unamortized deferred financing fees associated with the KeyBank Credit Agreement were $667.
 
On September 10, 2007, the Company and RBCA entered into an amendment of the KeyBank Credit Agreement. Pursuant to the terms of the amendment, the commitment fees payable under the KeyBank Credit Agreement were decreased from a range of 10 to 27.5 basis points, based on the Company’s leverage ratio (as defined under the KeyBank Credit Agreement) to a range of 7.5 to 20 basis points. Further, the margin payable under the KeyBank Credit Agreement for revolving loans that are base rate loans, based on the Company’s leverage ratio, was decreased from a range of 0 to 75 basis points to a range of 0 to 25 basis points. The margin payable under the KeyBank Credit Agreement for revolving loans that are fixed rate loans, based on the Company’s leverage ratio (as defined under the agreement) was decreased from a range of 62.5 to 165 basis points to a range of 37.5 to 115 basis points. Also, the covenant requiring the Company to limit capital expenditures (excluding acquisitions) in any fiscal year to an amount not to exceed $20,000 was amended to increase the limit to an amount not to exceed $30,000.

Approximately $21,638 of the KeyBank Credit Agreement is being utilized to provide letters of credit to secure RBCA’s obligations relating to certain Industrial Development Revenue Bonds (the “IRB’s”) and insurance programs. As of September 29, 2007, RBCA had the ability to borrow up to an additional $90,362 under the KeyBank Credit Agreement.

On September 4, 2007, the Company voluntarily paid off the Series 1998 IRB, the principal amount of which was $1,155.

On December 8, 2003, Schaublin entered into a bank credit facility (the “Swiss Credit Facility”) with Credit Suisse providing for 10,000 Swiss francs, or approximately $8,546, of term loan (the “Swiss Term Loan”) and up to 2,000 Swiss francs, or approximately $1,709, of revolving credit loans and letters of credit (the “Swiss Revolving Credit Facility”). RBCA pledged 99.4% of the present and future share capital of Schaublin S.A. (1,366 shares) against this facility. On November 8, 2004, Schaublin amended the Swiss Credit Facility to increase the Swiss Revolving Credit Facility to 4,000 Swiss francs, or approximately $3,418. Borrowings under the Swiss Credit Facility bear interest at a floating rate of LIBOR plus 2.25%. As of September 29, 2007, there were no borrowings outstanding under the Swiss Credit Facility.

The balances payable under all borrowing facilities are as follows:
   
September 29, 2007
 
March 31, 2007
 
KeyBank Credit Agreement
         
Five-year senior secured revolving credit facility; amounts outstanding bear interest at the prime rate or LIBOR, plus a specified margin, depending on the type of borrowing being made (5.75% at September 29, 2007)
 
$
38,000
 
$
42,000
 
Note Payable
   
750
   
750
 
Industrial Development Revenue Bonds 
             
Series 1994 A, bears interest at a variable rate, payable monthly through September 2017
   
7,700
   
7,700
 
Series 1994 B, bears interest at a variable rate, payable monthly through December 2017
 
 
3,000
 
3,000
 
Series 1998, bears interest at variable rates, payable monthly through December 2021
   
   
1,155
 
Series 1999, bearing interest at variable rates, payable monthly through April 2024
   
4,800
   
4,800
 
Total Debt
   
54,250
   
59,405
 
Less: Current Portion
   
750
   
750
 
Long-Term Debt
 
$
53,500
 
$
58,655
 

9

 
The current portion of long-term debt as of September 29, 2007 and March 31, 2007 consists of a $750 note payable related to the All Power acquisition.

7. Income Taxes

The Company adopted the provisions of FIN 48 on April 1, 2007. As a result of its implementation, the Company recognized an increase in the liability for unrecognized tax benefits of approximately $230 and a reduction to the April 1, 2007 balance of retained earnings. The total amount of unrecognized tax benefits as of April 1, 2007, including the cumulative effect of the adoption of FIN 48, is $3,210, substantially all of which represents liabilities that, if recognized, would impact the effective tax rate. Unrecognized tax benefits have not materially changed since April 1, 2007 and the Company does not anticipate any material changes within the next 6 months.

The Company files income tax returns in the U.S. federal jurisdiction, and various states and foreign jurisdictions. With few exceptions, the Company is no longer subject to state or foreign income tax examinations by tax authorities for years ending before March 31, 2001. The Company is no longer subject to U.S. federal tax examination by the Internal Revenue Service for years ending before March 31, 2003.

The Company recognizes the interest and penalties accrued related to unrecognized tax benefits in income tax expense. The Company had approximately $72 of accrued interest and penalties at April 1, 2007 with no material change through September 29, 2007.

The effective income tax rates for the three and six month periods ended September 29, 2007 and September 30, 2006 were 34.2% and 34.1% and 35.3% and 35.3%, respectively. The effective income tax rates are below the U.S. statutory rate due to a foreign tax rate differential and a manufacturing deduction.

8. Pension and Postretirement Plans 

The Company has noncontributory defined benefit pension plans covering union employees in its Heim division plant in Fairfield, Connecticut and its Plymouth subsidiary plant in Plymouth, Indiana.

Effective March 31, 2007, the pension plan for the Tyson subsidiary in Glasgow, Kentucky was frozen pursuant to the terms of the Shutdown Agreement between Tyson Bearings Company, Inc. and the United Steelworkers of America (AFL-CIO) Local 7461-01 dated February 6, 2007. No further benefits will accrue under this plan, and no new employees will become eligible for participation in the plan. However, the Company will continue to maintain the plan.

Effective May 1, 2006, the pension plan for the Nice subsidiary in Kulpsville, Pennsylvania was frozen in accordance with the terms of the Shutdown Agreement between RBC Nice Bearings, Inc. and the United Steelworkers of America (AFL-CIO) Local 6816-12 dated February 15, 2006. No further benefits will accrue under this plan, and no new employees will become eligible for participation in the plan. However, the Company will continue to maintain the plan. Net periodic benefit cost in the six month period ended September 30, 2006 included $77 related to the impact of the curtailment of this plan.
 
10


The following table illustrates the components of net periodic benefit cost for the Company’s pension benefits:
 
   
Pension Benefits
Three Months Ended
 
Pension Benefits
Six Months Ended
 
   
September 29,
2007
 
September 30,
2006
 
September 29,
2007
 
September 30,
2006
 
Components of net periodic benefit cost:
                 
Service cost
 
$
69
 
$
120
 
$
138
 
$
257
 
Interest cost
   
262
   
260
   
524
   
516
 
Expected return on plan assets
   
(340
)
 
(330
)
 
(680
)
 
(654
)
Amortization of prior service cost
   
2
   
7
   
4
   
9
 
Amortization of losses
   
18
   
42
   
36
   
95
 
Curtailment (gain) loss
   
   
(23
)
 
   
77
 
Total net periodic benefit cost
 
$
11
 
$
76
 
$
22
 
$
300
 

The postretirement medical and life insurance benefits for the Tyson subsidiary in Glasgow, Kentucky were curtailed pursuant to the terms of the Shutdown Agreement between Tyson Bearing Company, Inc. and the United Steelworkers of America (AFL-CIO) Local 7461-01 dated February 6, 2007.

Effective May 1, 2006, the postretirement medical and life insurance benefits for the Nice subsidiary in Kulpsville, Pennsylvania were curtailed pursuant to the terms of the Shutdown Agreement between RBC Nice Bearings, Inc. and the United Steelworkers of America (AFL-CIO) Local 6816-12 dated February 15, 2006. No further benefits will accrue under this plan, and no new employees will become eligible for participation in the plan. Life insurance benefits terminated July 31, 2006. Postretirement medical benefits will be available until the contract expires on January 31, 2008. Net periodic benefit cost in the six month period ended September 30, 2006 included a gain of $132 related to the impact of the curtailment of this plan.

The following table illustrates the components of net periodic benefit cost for the Company’s other postretirement benefits:
 
   
Other Postretirement Benefits
Three Months Ended
 
Other Postretirement Benefits
Six Months Ended
 
   
September 29,
2007
 
September 30,
2006
 
September 29,
2007
 
September 30,
2006
 
Components of net periodic benefit cost:
                 
Service cost
 
$
12
 
$
31
 
$
24
 
$
64
 
Interest cost
   
38
   
46
   
76
   
100
 
Prior service cost amortization
   
(7
)
 
(4
)
 
(14
)
 
(35
)
Amount of loss recognized
   
10
   
11
   
20
   
27
 
Curtailment (gain)
   
   
(314
)
 
   
(132
)
Total net periodic benefit cost
 
$
53
 
$
(230
)
$
106
 
$
24
 

9. Reportable Segments

The Company operates through operating segments for which separate financial information is available, and for which operating results are evaluated regularly by the Company's chief operating decision maker in determining resource allocation and assessing performance. Those operating segments with similar economic characteristics and that meet all other required criteria, including nature of the products and production processes, distribution patterns and classes of customers, are aggregated as reportable segments. Certain other operating segments do not exhibit the common attributes mentioned above and do not meet the quantitative thresholds for separate disclosure, and their information is combined and disclosed as “Other.” There is also a segment reflecting corporate charges.

The Company has four reportable business segments engaged in the manufacture and sale of the following:
 
Roller Bearings. Roller bearings are anti-friction bearings that use rollers instead of balls. The Company manufactures four basic types of roller bearings: heavy duty needle roller bearings with inner rings, tapered roller bearings, track rollers and aircraft roller bearings.
 
11

 
Plain Bearings. Plain bearings are produced with either self-lubricating or metal-to-metal designs and consist of several sub-classes, including rod end bearings, spherical plain bearings and journal bearings. Unlike ball bearings, which are used in high-speed rotational applications, plain bearings are primarily used to rectify inevitable misalignments in various mechanical components.

Ball Bearings. The Company manufactures four basic types of ball bearings: high precision aerospace, airframe control, thin section and commercial ball bearings which are used in high-speed rotational applications.

Other. Other consists of two minor operating locations that do not fall into the above segmented categories. The Company produces precision ground ball bearing screws at its LPP plant that offer repeatable positioning accuracy in machine tools, transfer lines, robotic handling and semiconductor equipment. The Company's Schaublin location produces precision machine tool collets that provide effective part holding and accurate part location during machining operations.

Corporate. Corporate consists of expenses incurred at the corporate office.

Segment performance is evaluated based on segment net sales and operating income. Items not allocated to segment operating income include corporate administrative expenses and certain other amounts.

   
Three Months Ended
 
Six Months Ended
 
   
September 29, 2007
 
September 30, 2006
 
September 29, 2007
 
September 30, 2006
 
Net External Sales
                 
Roller
 
$
23,107
 
$
23,356
 
$
46,750
 
$
47,597
 
Plain
   
36,175
   
33,055
   
73,895
   
67,084
 
Ball
   
13,832
   
12,178
   
27,253
   
24,340
 
Other
   
5,118
   
4,659
   
10,157
   
9,458
 
   
$
78,232
 
$
73,248
 
$
158,055
 
$
148,479
 
Operating Income
                         
Roller
 
$
6,666
 
$
5,939
 
$
13,885
 
$
12,087
 
Plain
   
9,566
   
9,035
   
19,611
   
18,134
 
Ball
   
3,204
   
2,989
   
6,661
   
5,920
 
Other
   
392
   
679
   
1,009
   
1,490
 
Corporate
   
(5,833
)
 
(6,032
)
 
(11,390
)
 
(11,523
)
   
$
13,995
 
$
12,610
 
$
29,776
 
$
26,108
 
Geographic External Sales
                         
Domestic
 
$
66,708
 
$
64,067
 
$
134,961
 
$
129,498
 
Foreign
   
11,524
   
9,181
   
23,094
   
18,981
 
   
$
78,232
 
$
73,248
 
$
158,055
 
$
148,479
 
Intersegment Sales
                         
Roller
 
$
2,125
 
$
1,979
 
$
4,281
 
$
4,003
 
Plain
   
233
   
261
   
502
   
531
 
Ball
   
1,857
   
1,187
   
3,433
   
2,189
 
Other
   
4,201
   
3,585
   
8,571
   
7,131
 
   
$
8,416
 
$
7,012
 
$
16,787
 
$
13,854
 

All intersegment sales are eliminated in consolidation.
 
12


10. Restructuring of Operations

In January 2007, the Company began the consolidation of its tapered bearing manufacturing capacity. The Company has discontinued manufacturing tapered bearings in its Glasgow, Kentucky facility and has consolidated the remaining manufacturing into other Company manufacturing facilities. At March 31, 2007, a balance of $893 was included in accrued liabilities related to this activity. This balance was paid during the six months ended September 29, 2007.

ITEM 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations
 
Cautionary Statement As To Forward-Looking Information 
 
The information in this discussion contains “forward-looking statements” within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934 which are subject to the “safe harbor” created by those sections. All statements other than statements of historical facts, included in this quarterly report on Form 10-Q regarding our strategy, future operations, future financial position, future revenues, projected costs, prospects and plans and objectives of management are “forward-looking statements” as the term is defined in the Private Securities Litigation Reform Act of 1995.

 The words “anticipates,” “believes,” “estimates,” “expects,” “intends,” “may,” “plans,” “projects,” “will,” “would” and similar expressions are intended to identify forward-looking statements, although not all forward-looking statements contain these identifying words. We may not actually achieve the plans, intentions or expectations disclosed in our forward-looking statements and you should not place undue reliance on our forward-looking statements. Actual results or events could differ materially from the plans, intentions and expectations disclosed in the forward-looking statements that we make. These forward-looking statements involve risks and uncertainties that could cause our actual results to differ materially from those in the forward-looking statements, including, without limitation, the risks identified under the heading “Risk Factors” set forth in the our Annual Report on Form 10-K for the year ended March 31, 2007 and other filings made with the Securities and Exchange Commission. Our forward-looking statements do not reflect the potential impact of any future acquisitions, mergers, dispositions, joint ventures or investments we may make. We do not intend, and undertake no obligation, to update or alter any forward-looking statement. The following section is qualified in its entirety by the more detailed information, including our financial statements and the notes thereto, which appears elsewhere in this Quarterly Report.

Overview

We are a well known international manufacturer of highly engineered precision plain, roller and ball bearings. Our precision solutions are integral to the manufacture and operation of most machines and mechanical systems, reduce wear to moving parts, facilitate proper power transmission and reduce damage and energy loss caused by friction. While we manufacture products in all major bearing categories, we focus primarily on the higher end of the bearing market where we believe our value added manufacturing and engineering capabilities enable us to differentiate ourselves from our competitors and enhance profitability. We have been providing bearing solutions to our customers since 1919. Over the past ten years, under the leadership of our current management team, we have significantly broadened our end markets, products, customer base and geographic reach. We currently operate 20 manufacturing facilities in four countries.

Demand for bearings generally follows the market for products in which bearings are incorporated and the economy as a whole. Purchasers of bearings include industrial equipment and machinery manufacturers, producers of commercial and military aerospace equipment such as missiles and radar systems, agricultural machinery manufacturers, construction and specialized equipment manufacturers and automotive and commercial truck manufacturers. The markets for our products are cyclical, and general market conditions could negatively impact our operating results. We have endeavored to mitigate the cyclicality of our product markets by entering into sole-source relationships and long-term purchase orders, through diversification across multiple market segments within the aerospace and defense and diversified industrial segments, by increasing sales to the aftermarket and by focusing on developing highly customized solutions.
 
13


Outlook

Backlog, as of September 29, 2007, was $191.2 million versus $175.0 million as of September 30, 2006. We continue to see positive momentum from the diversified industrial, aerospace and defense markets. Management believes that operating cash flows and available credit under the credit facility will provide adequate resources to fund internal and external growth initiatives for the foreseeable future.

Results of Operations

The following table sets forth the various components of our consolidated statements of operations, expressed as a percentage of net sales, for the periods indicated that are used in connection with the discussion herein. 
 
   
Three Months Ended
 
Six Months Ended
 
   
September 29, 2007
 
September 30, 2006
 
September 29, 2007
 
September 30, 2006
 
Statement of Operations Data: 
                 
Net sales
   
100.0
%
 
100.0
%
 
100.0
%
 
100.0
%
Gross margin
   
33.5
   
32.1
   
34.0
   
31.7
 
Selling, general and administrative
   
15.2
   
14.5
   
14.7
   
13.6
 
Other, net
   
0.4
   
0.4
   
0.4
   
0.4
 
Operating income
   
17.9
   
17.2
   
18.9
   
17.7
 
Interest expense, net
   
0.9
   
1.6
   
1.0
   
2.3
 
Loss on early extinguishment of debt
   
   
   
   
2.4
 
Income before income taxes
   
17.0
   
15.6
   
17.9
   
13.0
 
Provision for income taxes
   
5.8
   
5.5
   
6.1
   
4.6
 
Net income
   
11.2
   
10.1
   
11.8
   
8.4
 

Three Month Period Ended September 29, 2007 Compared to Three Month Period Ended September 30, 2006

Net Sales. Net sales for the three month period ended September 29, 2007 were $78.2 million, an increase of $5.0 million, or 6.8%, compared to $73.2 million for the same period in the prior year. This includes the impact of a decrease in the class 8 heavy truck market of $2.2 million, or 30.4%. During the three month period ended September 29, 2007, we experienced net sales growth in three of our four segments, driven by demand across our end markets as well as our continued efforts to supply new products to existing and new customers. Net sales to aerospace and defense customers grew 14.7% in the second quarter of fiscal 2008 compared to the same period last year, driven mainly by commercial and military aerospace aftermarket and OEM demand. Our net sales to our diversified industrial customers declined 0.2% in the second quarter of fiscal 2008 compared to the same period last year. Reflected in this change, our core markets of construction, mining and general industrial distribution grew 6.6%, offset by a decrease in year-over-year volume in our class 8 truck business.

The Plain Bearings segment achieved net sales of $36.2 million for the three month period ended September 29, 2007, an increase of $3.1 million, or 9.4%, compared to $33.1 million for the same period in the prior year. The commercial and military aerospace market grew $5.1 million due to an increase in airframe and aerospace bearing shipments to aircraft manufacturers and continued demand for aftermarket product. This was offset by a $2.0 million decline in net sales to our diversified industrial customers. This decline was mainly due to a shift in manufacturing capacity in response to growing aerospace demand and lower OEM volume.
 
14


The Roller Bearings segment achieved net sales of $23.1 million for the three month period ended September 29, 2007, a decrease of $0.3 million, or 1.1%, compared to $23.4 million for the same period in the prior year. Net sales to the class 8 truck OEM and aftermarket declined by $2.2 million, offset by an increase of $0.5 million in aerospace applications, general industrial demand and the inclusion of Phoenix, which accounted for $1.4 million of net sales for the period ended September 29, 2007.

The Ball Bearings segment achieved net sales of $13.8 million for the three month period ended September 29, 2007, an increase of $1.6 million, or 13.6%, compared to $12.2 million for the same period in the prior year. Of this increase, $0.6 million was driven principally by increased aerospace and defense-related demand. Sales to our customers in the industrial market increased $1.0 million compared to the same period last fiscal year. The inclusion of CBS accounted for $0.9 million of the net sales increase for the period ended September 29, 2007.

The Other segment, which is focused mainly on the sale of precision ball screws and machine tool collets, achieved net sales of $5.1 million for the three month period ended September 29, 2007, an increase of $0.4 million, or 9.9%, compared to $4.7 million for the same period last year. This increase was primarily due to increased sales of machine tool collets in Europe.

Gross Margin. Gross margin was $26.2 million, or 33.5% of net sales, for the three month period ended September 29, 2007, versus $23.5 million, or 32.1% of net sales, for the comparable period in fiscal 2007. The increase in our gross margin as a percentage of net sales was primarily the result of an overall increase in volume and a shift in mix toward higher margin products offset by $0.3 million inefficiency costs related to the physical relocation of our aircraft products manufacturing facility during the quarter.

Selling, General and Administrative. SG&A expenses increased by $1.3 million, or 12.0%, to $11.9 million for the three month period ended September 29, 2007 compared to $10.6 million for the same period in fiscal 2007. As a percentage of net sales, SG&A increased to 15.2% for the three month period ended September 29, 2007 compared to 14.5% for the same period in fiscal 2007. The increase of $1.3 million was due to additional personnel necessary to support our increased and anticipated increase of volume and the inclusion of Phoenix and CBS.

Other, net. Other, net for the three month period ended September 29, 2007 increased by $0.1 million to $0.4 million for the three month period ended September 29, 2007 compared to $0.3 million for the same period in fiscal 2007. For the three month period ended September 29, 2007, other, net consisted of $0.3 million of amortization of intangibles and $0.1 million of moving expenses related to the relocation of our aircraft products manufacturing facility. For the three month period ended September 30, 2006, other, net included $0.1 million of plant shutdown expenses related to our RBC Nice Bearings, Inc. plant consolidation and $0.2 million of amortization of intangibles.

Operating Income. Operating income was $14.0 million, or 17.9% of net sales, for the three month period ended September 29, 2007 compared to $12.6 million, or 17.2% of net sales, for the three month period ended September 30, 2006. Operating income for our Plain Bearings segment was $9.6 million for the three month period ended September 29, 2007, or 26.4% of net sales, compared to $9.0 million for the same period last year, or 27.3% of net sales. Our Roller Bearings segment achieved an operating income for the three month period ended September 29, 2007 of $6.7 million, or 28.8% of net sales, compared to $5.9 million, or 25.4% of net sales, for the three month period ended September 30, 2006. Our Ball Bearings segment achieved an operating income of $3.2 million, or 23.2% of net sales, for the three month period ended September 29, 2007, compared to $3.0 million, or 24.5% of net sales, for the same period in fiscal 2007. Our Other segment achieved an operating income of $0.4 million, or 7.7% of net sales, for the three month period ended September 29, 2007, compared to $0.7 million, or 14.6% of net sales, for the same period in fiscal 2007. The increase in operating income in three of our four segments was driven primarily by a shift in mix toward higher margin products and increased manufacturing efficiency resulting from facility consolidations, offset by overhead underabsorption related to the relocation of our aircraft products manufacturing facility.
 
15


Interest Expense, net. Interest expense, net decreased by $0.5 million, or 43.4%, to $0.7 million in the three month period ended September 29, 2007, compared to $1.2 million in the same period last fiscal year. Amortization of deferred financing costs and debt discount are recorded as a component of net interest expense. Amortization expenses included in interest expense, net were $0.1 million for the three month periods ended September 29, 2007 and September 30, 2006, respectively.

Income Before Income Taxes. Income before taxes increased by $1.9 million, to $13.3 million for the three month period ended September 29, 2007 compared to $11.4 million for the three month period ended September 30, 2006.

Income Taxes. Income tax expense for the three month period ended September 29, 2007 was $4.5 million compared to $4.0 million for the three month period ended September 30, 2006. Our effective income tax rate for the three month period ended September 29, 2007 was 34.2% compared to 35.3% for the three month period ended September 30, 2006. The effective income tax rates are below the U.S. statutory rate due to a foreign tax rate differential and a manufacturing deduction.

Net Income. Net income increased by $1.3 million to $8.7 million for the three month period ended September 29, 2007 compared to $7.4 million for the three month period ended September 30, 2006.

Six Month Period Ended September 29, 2007 Compared to Six Month Period Ended September 30, 2006

Net Sales. Net sales for the six month period ended September 29, 2007 were $158.1 million, an increase of $9.6 million, or 6.4%, compared to $148.5 million for the same period in the prior year. This includes the impact of a decrease in the class 8 heavy truck market of $5.6 million, or 37.8%. During the six month period ended September 29, 2007, we experienced net sales growth in three of our four segments, driven by demand across our end markets as well as our continued efforts to supply new products to existing and new customers. Net sales to aerospace and defense customers grew 16.9% in the six month period of fiscal 2008 compared to the same period last year, driven mainly by commercial and military aerospace aftermarket and OEM demand. Our net sales to our diversified industrial customers declined 2.8% in the six month period of fiscal 2008 compared to the same period last year. Reflected in this change, our core markets of construction, mining and general industrial distribution grew 5.2%, offset by a decrease in year-over-year volume in our class 8 truck aftermarket business.

The Plain Bearings segment achieved net sales of $73.9 million for the six month period ended September 29, 2007, an increase of $6.8 million, or 10.2%, compared to $67.1 million for the same period in the prior year. The commercial and military aerospace market grew $10.2 million due to an increase in airframe and aerospace bearing shipments to aircraft manufacturers and continued demand for aftermarket product. This was offset by a $3.4 million decline in net sales to our diversified industrial customers. This decline was mainly due to a shift in manufacturing capacity in response to growing aerospace demand and lower OEM volume.

The Roller Bearings segment achieved net sales of $46.8 million for the six month period ended September 29, 2007, a decrease of $0.8 million, or 1.8%, compared to $47.6 million for the same period in the prior year. Net sales to the class 8 truck OEM and aftermarket declined by $5.6 million, offset by an increase of $2.5 million in aerospace applications, general industrial demand and the inclusion of Phoenix, which accounted for $2.3 million of net sales for the six month period ended September 29, 2007.

The Ball Bearings segment achieved net sales of $27.3 million for the six month period ended September 29, 2007, an increase of $3.0 million, or 12.0%, compared to $24.3 million for the same period in the prior year. Of this increase, $1.6 million was driven principally by increased aerospace and defense-related demand. Sales to our customers in the industrial market increased $1.4 million compared to the same period last fiscal year. The inclusion of CBS accounted for $0.9 million of the net sales increase for the six month period ended September 29, 2007.
 
16


The Other segment, which is focused mainly on the sale of precision ball screws and machine tool collets, achieved net sales of $10.2 million for the six month period ended September 29, 2007, an increase of $0.7 million, or 7.4%, compared to $9.5 million for the same period last year. This increase was primarily due to increased sales of machine tool collets in Europe.

Gross Margin. Gross margin was $53.7 million, or 34.0% of net sales, for the six month period ended September 29, 2007, versus $47.0 million, or 31.7% of net sales, for the comparable period in fiscal 2007. The increase in our gross margin as a percentage of net sales was primarily the result of an overall increase in volume and a shift in mix toward higher margin products combined with the corresponding effects of efficiency improvements, offset by $0.3 million underabsorption related to the relocation of our aircraft products manufacturing facility during the six month period ended September 29, 2007.

Selling, General and Administrative. SG&A expenses increased by $3.0 million, or 14.6%, to $23.2 million for the six month period ended September 29, 2007 compared to $20.2 million for the same period in fiscal 2007. As a percentage of net sales, SG&A increased to 14.7% for the six month period ended September 29, 2007 compared to 13.6% for the same period in fiscal 2007. The increase of $3.0 million was due to additional personnel necessary to support our increased and anticipated increase of volume and the inclusion of Phoenix and CBS. 

Other, net. Other, net for the six month period ended September 29, 2007 of $0.7 million was flat with the comparable period in fiscal 2007. For the six month period ended September 29, 2007, other, net consisted of $0.5 million of amortization of intangibles and $0.2 million of moving expenses related to the relocation of our aircraft products manufacturing facility. For the six month period ended September 30, 2006, other, net included $0.3 million of plant shutdown expenses related to our RBC Nice Bearings, Inc. plant consolidation, $0.3 million of amortization of intangibles, and $0.1 million of fixed asset disposals.

Operating Income. Operating income was $29.8 million, or 18.9% of net sales, for the six month period ended September 29, 2007 compared to $26.1 million, or 17.7% of net sales, for the six month period ended September 30, 2006. Operating income for our Plain Bearings segment was $19.6 million for the six month period ended September 29, 2007, or 26.5% of net sales, compared to $18.1 million for the same period last year, or 27.0% of net sales. Our Roller Bearings segment achieved an operating income for the six month period ended September 29, 2007 of $13.9 million, or 29.7% of net sales, compared to $12.1 million, or 25.4% of net sales, for the six month period ended September 30, 2006. Our Ball Bearings segment achieved an operating income of $6.7 million, or 24.4% of net sales, for the six month period ended September 29, 2007, compared to $5.9 million, or 24.3% of net sales, for the same period in fiscal 2007. Our Other segment achieved an operating income of $1.0 million, or 9.9% of net sales, for the six month period ended September 29, 2007, compared to $1.5 million, or 15.8% of net sales, for the same period in fiscal 2007. The increase in operating income in three of our four segments was driven primarily by a shift in mix toward higher margin products offset by $0.3 million underabsorption related to the relocation of our aircraft products manufacturing facility during the six month period ended September 29, 2007.

Interest Expense, net. Interest expense, net decreased by $1.9 million, or 54.0%, to $1.5 million in the six month period ended September 29, 2007, compared to $3.4 million in the same period last fiscal year. Amortization of deferred financing costs and debt discount are recorded as a component of net interest expense. Amortization expenses included in interest expense, net were $0.1 million for the six month period ended September 29, 2007 compared to $0.3 million for the six month period ended September 30, 2006.

Loss on Early Extinguishment of Debt. For the six month period ended September 30, 2006, loss on extinguishment of debt was $3.6 million for the non-cash write-off of deferred debt issuance costs associated with the early termination of the senior credit facility.

Income Before Income Taxes. Income before taxes increased by $9.0 million, to $28.2 million for the six month period ended September 29, 2007 compared to $19.2 million for the six month period ended September 30, 2006.
 
17


Income Taxes. Income tax expense for the six month period ended September 29, 2007 was $9.6 million compared to $6.8 million for the six month period ended September 30, 2006. Our effective income tax rate for the six month period ended September 29, 2007 was 34.1% compared to 35.3% for the six month period ended September 30, 2006. The effective income tax rates are below the U.S. statutory rate due to a foreign tax rate differential and a manufacturing deduction.

Net Income. Net income increased by $6.2 million to $18.6 million for the six month period ended September 29, 2007 compared to $12.4 million for the six month period ended September 30, 2006.

Liquidity and Capital Resources

Liquidity

On June 15, 2007, our board of directors authorized us to repurchase up to $10.0 million of our common stock from time to time on the open market, through block trades, or in privately negotiated transactions depending on market conditions, alternative uses of capital and other factors. Purchases may be commenced, suspended or discontinued at any time without prior notice. The new program, which does not have an expiration date, replaces a $7.5 million program that expired on March 31, 2007. As of September 29, 2007, 5,599 shares of stock have been repurchased under the new program for an aggregate cost of $0.2 million.

On April 18, 2006, pursuant to a purchase agreement with Merrill Lynch & Co., Merrill Lynch, Pierce, Fenner & Smith Incorporated, KeyBanc Capital Markets and Robert W. Baird & Co., we, along with certain of our stockholders, sold 8,989,550 shares of our common stock (5,995,529 sold by certain of our stockholders). The offering yielded us aggregate net proceeds of approximately $57.8 million after payment of the underwriting discount, commissions and offering expenses. The full amount of the net proceeds was used to prepay outstanding balances under the previous credit agreement.

On June 26, 2006, the Company and RBCA terminated its previous credit agreement, and the related credit, security and ancillary agreements, and entered into a credit agreement (the “KeyBank Credit Agreement”) and related security and guaranty agreements with certain banks, KeyBank National Association, as Administrative Agent, and J.P. Morgan Chase Bank, N.A. as Co-Lead Arrangers and Joint Lead Book Runners. The KeyBank Credit Agreement provides us with a $150.0 million five-year senior secured revolving credit facility which can be increased by up to $75.0 million, in increments of $25.0 million, under certain circumstances and subject to certain conditions (including the receipt from one or more lenders of the additional commitment).

On September 10, 2007, the Company and RBCA entered into an amendment of the KeyBank Credit Agreement. Pursuant to the terms of the amendment, the commitment fees payable under the KeyBank Credit Agreement were decreased from a range of 10 to 27.5 basis points, based on the Company’s leverage ratio (as defined under the KeyBank Credit Agreement) to a range of 7.5 to 20 basis points. Further, the margin payable under the KeyBank Credit Agreement for revolving loans that are base rate loans, based on the Company’s leverage ratio, was decreased from a range of 0 to 75 basis points to a range of 0 to 25 basis points. The margin payable under the KeyBank Credit Agreement for revolving loans that are fixed rate loans, based on the Company’s leverage ratio (as defined under the agreement) was decreased from a range of 62.5 to 165 basis points to a range of 37.5 to 115 basis points. Also, the covenant requiring the Company to limit capital expenditures (excluding acquisitions) in any fiscal year to an amount not to exceed $20.0 million was amended to increase the limit to an amount not to exceed $30.0 million.

Amounts outstanding under the KeyBank Credit Agreement are due and payable on its expiration date (June 24, 2011). We may elect to prepay some or all of the outstanding balance from time to time without penalty.

Since our net operating losses will be fully utilized during fiscal 2008, we expect an increase in our cash disbursements during the second half of the fiscal year to satisfy our income tax obligations.
 
18


On December 8, 2003, Schaublin entered into a bank credit facility (the “Swiss Credit Facility”) with Credit Suisse providing for 10.0 million Swiss francs, or approximately $8.5 million, of term loan (the “Swiss Term Loan”) and up to 2.0 million Swiss francs, or approximately $1.7 million, of revolving credit loans and letters of credit (the “Swiss Revolving Credit Facility”). RBCA pledged 99.4% of the present and future share capital of Schaublin S.A. (1,366 shares) against this facility. On November 8, 2004, Schaublin amended the Swiss Credit Facility to increase the Swiss Revolving Credit Facility to 4.0 million Swiss francs, or approximately $3.4 million. Borrowings under the Swiss Credit Facility bear interest at a floating rate of LIBOR plus 2.25%. As of September 29, 2007, there were no borrowings outstanding under the Swiss Credit Facility.
 
Cash Flows

Six Month Period Ended September 29, 2007 Compared to the Six Month Period Ended September 30, 2006

In the six month period ended September 29, 2007, we generated cash of $23.6 million from operating activities compared to $27.4 million for the six month period ended September 30, 2006. The decrease of $3.8 million was mainly a result of decreases of $6.2 million in deferred taxes, $3.5 million in non-cash charges, $9.3 million in inventory and $1.1 million in prepaid expenses and other current assets offset by increases of $6.2 million in net income, $1.4 million in other non-current assets, $3.6 million in accounts payable, $2.8 million in accrued expenses and other current liabilities, $2.1 million in other non-current liabilities and $0.2 million in accounts receivable.

Cash used for investing activities for the six month period ended September 29, 2007 included $11.1 million related to capital expenditures compared to $4.6 million for the six month period ended September 30, 2006. Investing activities in fiscal 2008 also included $7.9 million related to the acquisitions of Phoenix and CBS (see Note 1).
 
Financing activities used $4.1 million in the six month period ended September 29, 2007, primarily driven by $4.0 million in cash used to pay down debt outstanding under our KeyBank Credit Agreement, $1.2 million used for voluntary pay off of the Series 1998 IRB, $0.2 million for the repurchase of common stock and $0.1 million for principal payments on capital lease obligations offset by $1.4 million proceeds from the exercise of stock options.
 
Capital Expenditures

Our capital expenditures were $11.1 million for the six month period ended September 29, 2007. We expect to make capital expenditures of approximately $15.0 to $20.0 million during fiscal 2008 in connection with our existing business. We intend to fund our fiscal 2008 capital expenditures principally through existing cash, internally generated funds and borrowings under our bank facilities. We may also make substantial additional expenditures in connection with acquisitions.

Obligations and Commitments
 
As of September 29, 2007, there was no material change in debt and interest, capital lease, operating lease or pension and postretirement obligations as compared to such obligations and liabilities as of March 31, 2007.

ITEM 3. Quantitative and Qualitative Disclosures About Market Risk
 
Quantitative and Qualitative Disclosure About Market Risk

We are exposed to market risks, which arise during the normal course of business from changes in interest rates and foreign currency exchange rates.

Interest Rates. We are exposed to market risk from changes in the interest rates on a significant portion of our outstanding indebtedness. Outstanding balances under our KeyBank Credit Agreement generally bear interest at the prime rate or LIBOR (the London inter-bank offered rate for deposits in U.S. dollars for the applicable LIBOR period) plus a specified margin, depending on the type of borrowing being made. The applicable margin is based on our consolidated ratio of net debt to adjusted EBITDA from time to time. As of September 29, 2007, our margin is 0.0% for prime rate loans (prime rate at September 29, 2007 was 7.75%) and 0.625% for LIBOR rate loans (one month LIBOR rate at September 29, 2007 was 5.125%). As of September 29, 2007, based on the aggregate amount of $38.0 million outstanding under our KeyBank Credit Agreement, a 100 basis point change in interest rates would have changed our interest expense by approximately $0.4 million per year.
 
19

 
Interest rate fluctuations affect the fair market value of our fixed rate debt, but with respect to such fixed rate instruments, do not impact our earnings or cash flow.
 
Foreign Currency Exchange Rates. As a result of increased sales in Europe, our exposure to risk associated with fluctuating currency exchange rates between the U.S. dollar, the Euro, the Swiss Franc and the British Pound has increased. Our Swiss operations utilize the Swiss Franc as the functional currency, our French operations utilize the Euro as the functional currency and our English operations utilize the British Pound as the functional currency. Foreign currency transaction gains and losses are included in earnings. Approximately 15% of our net sales were denominated in foreign currencies in the first half of fiscal 2008. We expect that this proportion is likely to increase as we seek to increase our penetration of foreign markets, particularly within the aerospace and defense markets. Foreign currency transaction exposure arises primarily from the transfer of foreign currency from one subsidiary to another within the group, and to foreign currency denominated trade receivables. Unrealized currency translation gains and losses are recognized upon translation of the foreign subsidiaries’ balance sheets to U.S. dollars. Because our financial statements are denominated in U.S. dollars, changes in currency exchange rates between the U.S. dollar and other currencies have had, and will continue to have, an impact on our earnings. We currently do not have exchange rate hedges in place to reduce the risk of an adverse currency exchange movement. Although currency fluctuations have not had a material impact on our financial performance in the past, such fluctuations may materially affect our financial performance in the future. The impact of future exchange rate fluctuations on our results of operations cannot be accurately predicted.

Off-Balance Sheet Arrangements

We have no off-balance sheet arrangements.

ITEM 4. Controls and Procedures
 
Our management, with the participation of our Chief Executive Officer and Chief Financial Officer, has evaluated the effectiveness of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934 (the “Exchange Act”)) as of September 29, 2007. Based on this evaluation, our Chief Executive Officer and Chief Financial Officer have concluded that, as of September 29, 2007, our disclosure controls and procedures were (1) designed to ensure that information relating to our Company required to be disclosed by us in the reports that we file or submit under the Exchange Act is recorded, processed, summarized and reported to our Chief Executive Officer and Chief Financial Officer within the time periods specified in the rules and forms of the U.S. Securities and Exchange Commission, and (2) effective, in that they provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles.

Changes in Internal Control over Financial Reporting
 
No change in our internal control over financial reporting occurred during the six month period ended September 29, 2007 that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act).
 
20

 
Limitation on Effectiveness of Controls  
 
It should be noted that any system of controls, however well designed and operated, can provide only reasonable, and not absolute, assurance that the objectives of the system are met. The design of any control system is based, in part, upon the benefits of the control system relative to its costs. Control systems can be circumvented by the individual acts of some persons, by collusion of two or more people, or by management override of the control. In addition, over time, controls may become inadequate because of changes in conditions, or the degree of compliance with the policies or procedures may deteriorate. Because of these and other inherent limitations of control systems, there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions, regardless of how remote.
 
PART II - OTHER INFORMATION

ITEM 1. Legal Proceedings
 
From time to time, we are involved in litigation and administrative proceedings which arise in the ordinary course of our business. We do not believe that any litigation or proceeding in which we are currently involved, either individually or in the aggregate, is likely to have a material adverse effect on our business, financial condition, operating results, cash flow or prospects.

ITEM 1A. Risk Factors
 
There have been no material changes to our risk factors and uncertainties during the six month period ended September 29, 2007. For a discussion of the Risk Factors, refer to Part I, Item 1A, “Risk Factors,” contained in the Company’s Annual Report on Form 10-K for the period ended March 31, 2007.

ITEM 2. Unregistered Sales of Equity Securities and Use of Proceeds
 
Unregistered Sales of Equity Securities
 
None.
 
Use of Proceeds 
 
Not applicable.

Issuer Purchases of Equity Securities

Total share repurchases for the three months ended September 29, 2007 are as follows:

 
Period
 
Total number
of shares
purchased
 
Average
price paid
per share
 
Number of
shares
purchased
as part of the
publicly
announced
program
 
Approximate
dollar value
of shares still
available to be
purchased
under the
program
(000’s)
 
07/01/2007-07/28/2007
   
5,599
 
$
41.85
   
5,599
 
$
9,766
 
07/29/2007-08/25/2007
   
   
   
   
 
08/26/2007-09/29/2007
   
   
   
   
 
Total
   
5,599
 
$
41.85
   
5,599
 
$
9,766
 

21

 
These share repurchases represent restricted shares retained to pay withholding taxes.

On June 15, 2007, our board of directors authorized us to repurchase up to $10.0 million of our common stock from time to time on the open market, through block trades, or in privately negotiated transactions depending on market conditions, alternative uses of capital and other factors. Purchases may be commenced, suspended or discontinued at any time without prior notice. The new program, which does not have an expiration date, replaces a $7.5 million program that expired on March 31, 2007.

ITEM 3. Defaults Upon Senior Securities
 
Not applicable.
 
ITEM 4. Submission of Matters to a Vote of Security Holders
 
The Annual General Meeting of Stockholders of the Company was held on September 13, 2007. The items voted upon by the Company’s shareholders included nominations to elect two members of the Company’s board of directors, the ratification of the appointment of the Company’s Independent Registered Public Accounting Firm for fiscal 2008 and approval of an amendment to the Company’s 2005 Long-Term Incentive Plan to provide for the increase in the number of authorized shares.
 
The shareholders voted as follows on the following matters:
 
The election of the following directors to hold office for a three-year term expiring in 2010 was approved by the following votes:
 
Richard Crowell was approved by a vote of 19,976,047 shares voting for and 111,522 shares withheld.
 
Alan Levine was approved by a vote of 19,976,919 shares voting for and 110,650 shares withheld.
 
The ratification of the appointment of Ernst & Young LLP as the Company’s Independent Registered Public Accounting Firm for fiscal year 2008 was approved by a vote of 19,993,340 shares voting for, 82,076 shares voting against, and 12,153 shares abstaining.
 
The amendment to the Company’s 2005 Long-Term Incentive Plan to provide for the increase in the number of authorized shares to be issued under the plan from 1,639,170 to 2,239,170 was approved by a vote of 14,758,200 shares voting for, 2,392,040 shares voting against, and 504,383 shares abstaining. Of the additional 600,000 shares authorized, none will be used for restricted stock awards.
 
There were 2,434,185 broker non-votes.
 
ITEM 5. Other Information
 
Not applicable.
 
ITEM 6. Exhibits
 
Exhibit
Number
 
Exhibit Description
10.1
 
Credit Agreement, dated as of June 26, 2006 by and between RBC Bearings Incorporated and KeyBank National Association, as Administrative Agent and Lender filed as Exhibit 99.1 on Form 8-K dated July 18, 2006 is hereby incorporated by reference herein.
     
10.2
 
Parent Guaranty, dated June 26, 2006, by and between RBC Bearings Incorporated and KeyBank National Association, as Administrative Agent and Lender filed as Exhibit 99.2 on Form 8-K dated July 18, 2006 is hereby incorporated by reference herein.
     
10.3
 
Security Agreement, dated June 26, 2006, by and between Roller Bearing Company of America, Incorporated and KeyBank National Association, as Administrative Agent and Lender filed as Exhibit 99.3 on Form 8-K dated July 18, 2006 is hereby incorporated by reference herein.
 
22

 
10.4
 
Amendment No. 2 to Credit Agreement, dated as of September 10, 2007 by and between RBC Bearings Incorporated and KeyBank National Association, as Administrative Agent and Lender filed as Exhibit 10.1 on Form 8-K dated September 10, 2007 is hereby incorporated by reference herein.
     
31.01
 
Certification of Chief Executive Officer Pursuant to Securities Exchange Act Rule 13a-14(a).
     
31.02
 
Certification of Chief Financial Officer Pursuant to Securities Exchange Act Rule 13a-14(a).
     
32.01
 
Certification of Chief Executive Officer Pursuant to 18 U.S.C. Section 1350 and Securities Exchange Act Rule 13a-14(b).*
     
32.02
 
Certification of Chief Financial Officer Pursuant to 18 U.S.C. Section 1350 and Securities Exchange Act Rule 13a-14(b).*


*  This certification accompanies this Quarterly Report on Form 10-Q, is not deemed filed with the SEC and is not to be incorporated by reference into any filing of the Company under the Securities Act of 1933, as amended, or the Securities Exchange Act of 1934, as amended (whether made before or after the date of this Quarterly Report on Form 10-Q), irrespective of any general incorporation language contained in such filing.
23


SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the Registrant has duly caused this Report to be signed on its behalf by the undersigned, thereunto duly authorized.
     
 
RBC BEARINGS INCORPORATED
(Registrant)
 
 
 
 
 
 
By:  
/s/ Dr. Michael J. Hartnett
 
Name: Dr. Michael J. Hartnett
 
Title: Chief Executive Officer
 
Date: November 6, 2007
     
 
By:  
/s/ Daniel A. Bergeron 
 
Name: Daniel A. Bergeron
 
Title: Chief Financial Officer
 
Date: November 6, 2007
 
24


EXHIBIT INDEX

Exhibit
Number
 
Exhibit Description
10.1
 
Credit Agreement, dated as of June 26, 2006 by and between RBC Bearings Incorporated and KeyBank National Association, as Administrative Agent and Lender filed as Exhibit 99.1 on Form 8-K dated July 18, 2006 is hereby incorporated by reference herein.
     
10.2
 
Parent Guaranty, dated June 26, 2006, by and between RBC Bearings Incorporated and KeyBank National Association, as Administrative Agent and Lender filed as Exhibit 99.2 on Form 8-K dated July 18, 2006 is hereby incorporated by reference herein.
     
10.3
 
Security Agreement, dated June 26, 2006, by and between Roller Bearing Company of America, Incorporated and KeyBank National Association, as Administrative Agent and Lender filed as Exhibit 99.3 on Form 8-K dated July 18, 2006 is hereby incorporated by reference herein.
     
10.4
 
Amendment No. 2 to Credit Agreement, dated as of September 10, 2007 by and between RBC Bearings Incorporated and KeyBank National Association, as Administrative Agent and Lender filed as Exhibit 10.1 on Form 8-K dated September 10, 2007 is hereby incorporated by reference herein.
     
31.01
 
Certification of Chief Executive Officer Pursuant to Securities Exchange Act Rule 13a-14(a).
     
31.02
 
Certification of Chief Financial Officer Pursuant to Securities Exchange Act Rule 13a-14(a).
     
32.01
 
Certification of Chief Executive Officer Pursuant to 18 U.S.C. Section 1350 and Securities Exchange Act Rule 13a-14(b).*
     
32.02
 
Certification of Chief Financial Officer Pursuant to 18 U.S.C. Section 1350 and Securities Exchange Act Rule 13a-14(b).*


*  This certification accompanies this Quarterly Report on Form 10-Q, is not deemed filed with the SEC and is not to be incorporated by reference into any filing of the Company under the Securities Act of 1933, as amended, or the Securities Exchange Act of 1934, as amended (whether made before or after the date of this Quarterly Report on Form 10-Q), irrespective of any general incorporation language contained in such filing.
 
25

 

Exhibit 31.01
 
CERTIFICATION OF CHIEF EXECUTIVE OFFICER
PURSUANT TO SECTION 302 OF THE SARBANES-OXLEY ACT OF 2002
 
I, Dr. Michael J. Hartnett, certify that:
 
1. I have reviewed this quarterly report on Form 10-Q of RBC Bearings Incorporated;
 
2. Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;
 
3. Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;
 
4. The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:
 
a) designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including any consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;
 
b) designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles; and

c) evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and
 
d) disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and
 
5. The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):
 
a) all significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and
 
b) any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.
 
     
Date: November 6, 2007
By:   /s/ Dr. Michael J. Hartnett
 
Dr. Michael J. Hartnett
 
President and Chief Executive Officer
 


Exhibit 31.02
 
CERTIFICATION OF CHIEF FINANCIAL OFFICER
PURSUANT TO SECTION 302 OF THE SARBANES-OXLEY ACT OF 2002
 
I, Daniel A. Bergeron, certify that:
 
1. I have reviewed this quarterly report on Form 10-Q of RBC Bearings Incorporated;
 
2. Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;
 
3. Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;
 
4. The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:
 
a) designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including any consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;
 
b) designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles; and

c) evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and
 
d) disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and
 
5. The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):
 
a) all significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and
 
b) any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.
 
     
Date: November 6, 2007
By:   /s/ Daniel A. Bergeron
 
Daniel A. Bergeron
 
Chief Financial Officer
 
 
 

 
 
 
Exhibit 32.01
 
CERTIFICATION OF CHIEF EXECUTIVE OFFICER
PURSUANT TO
18 U.S.C SECTION 1350
 
The undersigned, Dr. Michael J. Hartnett, the President and Chief Executive Officer of RBC Bearings Incorporated (the “Company”), pursuant to 18 U.S.C. §1350, hereby certifies that:
 
(i) the Quarterly Report on Form 10-Q for the period ended September 29, 2007 of the Company (the “Report”) fully complies with the requirements of Section 13(a) or 15(d) of the Securities Exchange Act of 1934; and
 
(ii) the information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the Company.
 
Dated:  November 6, 2007    
 
 
 
 
 
 
   /s/ Dr. Michael J. Hartnett
 
Dr. Michael J. Hartnett
 
President and Chief Executive Officer
 
 
 

 

Exhibit 32.02
 
CERTIFICATION OF CHIEF FINANCIAL OFFICER
PURSUANT TO
18 U.S.C. SECTION 1350
 
The undersigned, Daniel A. Bergeron, Chief Financial Officer, of RBC Bearings Incorporated (the “Company”), pursuant to 18 U.S.C. §1350, hereby certifies:
 
(i) the Quarterly Report on Form 10-Q for the period ended September 29, 2007 of the Company (the “Report”) fully complies with the requirements of Section 13(a) or 15(d) of the Securities Exchange Act of 1934; and
 
(ii) the information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the Company.
 
Dated:  November 6, 2007
       
       
    /s/ Daniel A. Bergeron
   
Daniel A. Bergeron
   
Chief Financial Officer